Connection Guides and Setup Instructions

Important: Your modem or router must be fibre-ready for use with the type of nbn technology at your address. If unsure, please check the technical specifications in the manual, on the manufacturer’s website or by calling the modem manufacturer... Read More

To set up TP-Link HX510 as a regular router, follow the steps below to connect your mesh device. Note: If your house or office already has ethernet cables /ethernet ports, we recommend connecting the Mesh device via this wired connection.   Connect... Read More

There are a lot of modem/router brands out there. We have listed some commonly used modems in Australia, in case you want to access your modem gateway to make some changes to your modem.   Commonly Used Modems The modem gateway by default is... Read More

1. Connect your nbn™ connection box to the main telephone socket using a gray telephone cable.   2. Connect the black power cord to the black port on the nbn™ box and the other end to the power outlet. 3. Use the Ethernet cable, usually blue... Read More

  1. Look for the nbn™ box as shown in the image above. 2. Connect the black power cord to the black port on the nbn™ box and the other end to the power outlet. 3. Use the Ethernet cable, usually blue or yellow, and connect the UNI-D port of... Read More