All Collections
Broadband Services
Modem Guides
How to Configure your Netgear Orbi RBR20 Modem
How to Configure your Netgear Orbi RBR20 Modem

This guide will assist you in connecting your Netgear Orbi RBR20 Modem to SpinTel network

Annive avatar
Written by Annive
Updated over a week ago

To get connected via your Netgear modem, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

Logging into your modem

To access modem gateway enter in the address bar of a web browser. If it does not work or if it has been changed, check your router's IP address. For instructions, click here.

Enter the admin user name and password.

The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive.

The BASIC Home page displays

  1. Select Internet

  2. Click Yes on "Does your Internet connection require a login?"

  3. From the Internet Service Provider menu, select PPPoE

  4. Enter your NBN login/username and password provided to you via email.

  5. Hit Apply to save your credentials.

Wait 3-5 minutes for the modem to go online, then test the service. Reboot modem if needed.

Related articles:

Did this answer your question?