All Collections
Broadband Services
Modem Guides
How to Configure Vodafone Wi-Fi Hub 2.0
How to Configure Vodafone Wi-Fi Hub 2.0

This guide will assist you in connecting your BYO Vodafone Wi-Fi Hub 2.0 modem to SpinTel network.

Annive avatar
Written by Annive
Updated over a week ago

Is Vodafone Wi-Fi Hub 2.0 NBN Ready?

The Vodafone Wi-Fi Hub 2.0 is a modem router that will also work with SpinTel for FTTN/B, FTTC, HFC, FTTP, and Fixed Wireless NBN services.

How Do You Connect Your Vodafone Wi-Fi Hub 2.0?

Depending on your nbn connection type, connect to one of the following:

For FTTN/FTTB

If there is no NBN Connection Box installed, connect the DSL port on the back of your modem to your phone wall socket using a telephone cable.

If there is an NBN Connection Box installed, connect the NBN Connection Box to the WAN port on the back of your modem using an ethernet cable.

Hybrid Fibre Coaxial (HFC)

Fibre to the Premises (FTTP)

Fibre to the Curb (FTTC)

To get connected via your Vodafone Wi-Fi Hub 2.0 modem, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

How Do You Log in To Your Vodafone Wi-Fi Hub 2.0 Modem?

To access the modem interface, please make sure your device is connected to your modem through a wired or wireless connection.

You can access the dashboard by typing 192.168.1.1 into your browser.

You can also find your login details on the device label on the back of your Wi-Fi Hub 2.0.

How Do You Configure Your Vodafone Wi-Fi Hub 2.0 Modem?

Once logged in, look for Advanced Set up > WAN Service.

Delete any other existing profile and click on Add. Otherwise, click Edit if there's only 1 active profile.

On the Internet Service Provider list, select Others. Otherwise, you can leave it as it is.

  • In the WAN Interfaces list, select

    • VDSL for FTTN/B service

    • Ethernet for HFC, FTTP, FTTC and Fixed Wireless service

  • In the WAN Type list, select PPP over Ethernet

Enter your nbn username and password provided to you via email when the order was completed. Hit Apply/Save to apply the new settings.

Wait 3-5 minutes for the modem to go online, then test the service. Reboot modem if needed.

Related articles:

Did this answer your question?