All Collections
Broadband Services
Modem Guides
How to Configure Your TP-Link Archer AXE75 | AXE5400
How to Configure Your TP-Link Archer AXE75 | AXE5400

This guide will assist you in connecting your TP-Link Archer AXE75 | AXE5400 modem to the SpinTel network.

Hannah avatar
Written by Hannah
Updated over a week ago

Is TP-Link Archer AXE75 Modem NBN Ready?

The TP-Link Archer AXE75 is a popular nbn™ modem router that will also work with SpinTel for FTTC, HFC, FTTP and Fixed Wireless NBN services.

To get connected via your TP-Link Archer AXE75 modem, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

How Do You Log in To Your TP-Link Archer AXE75?

To access the modem interface, please make sure your device is connected to your modem through a wired or wireless connection.

  1. From your browser, type in http://tplinkwifi in the address bar and hit Enter.

    If the IP address does not work or if it has been changed, check your router's IP address. For instructions, click here.

  2. If prompted with a login screen, create a log in password for secure management purposes. Then click Let’s Get Started to log in.

How Do You Set up Your TP-Link Archer AXE75 Modem?

Once logged in, the Setup Wizard shows up.

  1. Select your time zone and click Next to continue.

  2. WAN Connection Type will appear, select PPPoE for the connection type:

  3. Enter the username and password provided to you via email when the order was completed.

  4. Personalise your Wi-Fi credentials and click on Next. Follow the prompts until it reaches the Summary page and you're all set.

If the Setup Wizard fails,

  1. Go to the Internet tab and select PPPoE for the connection type.

  2. Enter the username and password provided to you via email when the order was completed.

  3. Click Save to apply the changes.

If Internet Setup fails,

  1. Go to Advanced tab.

  2. Click Internet on the left-hand panel.

  3. Select PPPoE for the connection type.

  4. Enter the username and password provided to you via email when the order was completed.

  5. Click Save to apply the changes.

Wait 3-5 minutes for your TP-Link Archer AXE75 modem to go online, then test the service.

Related articles:

Did this answer your question?