All Collections
Broadband Services
Modem Guides
How to Configure Grandstream GWN7052 Router
How to Configure Grandstream GWN7052 Router

This guide will assist you in connecting your Grandstream GWN7052 Router to SpinTel network.

Hannah avatar
Written by Hannah
Updated over a week ago

Is Grandstream GWN7052 NBN Ready?

The Grandstream GWN7052 router works with SpinTel for FTTC, HFC, FTTP, and Fixed Wireless NBN services.

How Do You Connect Your Grandstream GWN7052?

1. Power on the GWN7052: Connect the power adapter to the access point and plug it into a power outlet. GWN7052 can be powered on using the right PSU (DC 12V, 1A)

2. Connect to the GWN7052: Use an Ethernet cable to connect the WAN port to the NBN Connection Box.

3. Power on the NBN Connection Box: Plug the NBN connection box into the power socket.

How Do You Login to your Grandstream GWN7052?

To get connected via your Grandstream GWN7052, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

1. With your device connected to the Grandstream GWN7052, enter “myrouter.grandstream.com” or default IP address “192.168.80.1” in the address bar of a web browser then enter the password to login.

Note: GWN7052’s default password information is printed on the MAC tag at the bottom of the unit.

If the IP address does not work or if it has been changed, check your router's IP address. For instructions, click here.

2. After clicking login, you will be prompted to automatically change your own login password.

How Do You Set up Your Grandstream GWN7052?

1. Once logged in, the Quick Internet Configuration shows up, click to continue to the Setup Wizard.

2. Select Country/Time Zone and hit Next.

3. Select Internet Access with PPPoE for the connection type and enter the username and password provided to you via email when the order was completed.

4. Personalise your WiFi credentials and click on Next.

5. Review the Summary page and hit Exit.

Wait 3-5 minutes for the router to go online, then test the service. You're all set!

Did this answer your question?