Is TP Link VX230V Modem NBN Ready?
The TP Link VX230V is a popular nbn™ modem router that will also work with SpinTel for FTTN/B, FTTC, HFC, FTTP, and Fixed Wireless NBN services.
How Do You Connect Your TP Link VX230V Modem?
Depending on your nbn connection type, connect one of the following:
If there is no NBN Connection Box installed, connect the DSL port at the back of your modem to your phone wall socket.
If there is an NBN Connection Box installed, connect the LAN/WAN port at the back of your modem to your NBN Connection Box.
Connect any of the LAN ports on the back of your router to your PC (optional)
Connect the Power port on the back of your router to your power socket
How Do You Log in To Your TP Link VX230V Modem?
To access the modem interface, please make sure your device is connected to your modem through a wired or wireless connection.
From your browser, type in http://192.168.1.1 in the address bar and hit Enter.
The login details should be underneath the modem.
If the IP address does not work or if it has been changed, check your router's IP address. For instructions, click here.
Manual Configuration
FTTN or FTTB
1. Once logged in, go to the Basic tab
2. Next, select Internet
3. Choose DSL to configure.
4. For the ISP list, select Other and choose VDSL for the modulation type.
Note: Leave VLAN ID disabled/unticked.
5. Select PPPoE for the connection type, then enter the SpinTel Username and Password provided to you by email and then press Save.
FTTP, FTTC, HFC or Fixed Wireless service
1. Once logged in, go to the Basic tab
2. Next, select Internet
3. Choose EWAN to configure.
4. For the ISP list, select Other.
Note: Leave VLAN ID disabled/unticked.
5. Select PPPoE for the connection type, then enter the SpinTel Username and Password provided to you by email, and then press Save.