All Collections
Broadband Services
Modem Guides
How to configure your Netcomm NF12 Modem
How to configure your Netcomm NF12 Modem

This guide will assist you in connecting your Netcomm NF12 modem to SpinTel network

Liam Bal avatar
Written by Liam Bal
Updated over a week ago

To get connected via your Netcomm NF12 modem, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

Logging into your modem

1. To access the modem interface, please make sure your device is connected to your modem through wired or wireless connection. Enter into the browser address bar, type admin in the username and password field then click OK

2. Click on Yes, let’s get started with the wizard.

3. From the WAN Interface pull down the menu, select WAN.

Select PPP over Ethernet for the WAN Type, then enter the username/ user ID and password provided to you via email. Hit Next.

Personalise your WiFi credentials and hit Next until a confirmation page will show that setup is complete.

When you click Finish, the wizard applies your settings and the Advanced Status view is displayed.

Wait 3-5 minutes for the modem to go online, then test the service.

Reboot modem if needed.

Related articles:

Did this answer your question?