All Collections
Broadband Services
Modem Guides
How to Configure Sagemcom Fast 5366
How to Configure Sagemcom Fast 5366

This guide will assist you in connecting your Sagemcom Fast 5366 modem to SpinTel network

Liam Bal avatar
Written by Liam Bal
Updated over a week ago

To get connected via your Sagemcom Fast 5366 modem, you'll need to log into your modem gateway.

Note: Our support does not extend to all Optus Sagemcom modems due to their locked nature. If your Sagemcom modem is from Optus, we suggest trying a different modem.

Logging into your modem

To access modem gateway, enter 10.0.0138 in the address bar of a web browser. If it does not work, check your router's IP address. For instructions, click here.

Enter admin for both the username and password and click Login. If you have changed the login credentials, please enter the current username and password for your modem interface.

  1. Once logged in, click Broadband and make sure PPP enable is switched On.

  2. Enter the username and password provided to you via email

  3. Make sure Mode is set to PPPoE and hit Apply to save the changes.

Wait 3-5 minutes for the modem to go online, then test the service. Reboot the modem if needed.

Note: For any issues editing/modifying the Connection Settings, please refer to your previous ISP (or where the modem was brought from) for firmware updates/issues.


Related articles:

Did this answer your question?