Is TP-Link Archer A6 Modem NBN Ready?
The TP-Link Archer A6 is a popular nbn™ modem router that will also work with SpinTel for FTTN/B, FTTC, HFC, FTTP and Fixed Wireless NBN services.
To get connected via your TP-Link Archer A6 modem, you'll need to log into your modem gateway.
Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.
How Do You Log in To Your TP-Link Archer A6 Modem?
To access the modem interface, please make sure your device is connected to your modem through a wired or wireless connection.
1. From your browser, type in http://192.168.1.1 or http://tplinkmodem.net in the address bar and hit Enter.
If the IP address does not work or if it has been changed, check your router's IP address. For instructions, click here.
2. If prompted with a login screen, Create a strong password and click Let’s Get Started to log in.
How Do You Set up Your TP-Link Archer A6 Modem?
Once logged in, Click Quick Setup on the top of the page. Then follow the step-by-step instructions to connect your router to the internet.
Internet Connection Type will appear, select PPPoE for the connection type:
Enter the username and password provided to you via email when the order was completed.
Personalise your Wi-Fi credentials and click on Next. Follow the prompts (details below) until it reaches the Summary page and you're all set.
Click the Save button to complete the Quick Setup.
If the Setup Wizard fails,
1. Go to Basic > Internet page.
2. Click Save to make the settings effective, and you can refer to Test Internet Connectivity to test the internet connection.