All Collections
Broadband Services
Modem Guides
How to Configure Your Netgear Nighthawk AC2100 Modem
How to Configure Your Netgear Nighthawk AC2100 Modem

This guide will assist you in connecting your Netgear Nighthawk AC2100 modem to the SpinTel network

Liam Bal avatar
Written by Liam Bal
Updated over a week ago

Is Netgear Nighthawk AC2100 Modem NBN Ready?

The Netgear Nighthawk AC2100 modem is a popular nbn™ modem router that will also work with SpinTel for FTTC, HFC, FTTP and Fixed Wireless NBN services.

To get connected via your Netgear Nighthawk AC2100 modem, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

How Do You Log in To Your Netgear Nighthawk AC2100 Modem?

To access the modem interface, please make sure your device is connected to your modem through a wired or wireless connection.

1. From your browser, type in http://192.168.1.1 or http://www.routerlogin.net in the address bar and hit Enter.

If the IP address does not work or if it has been changed, check your router's IP address. For instructions, click here.

2. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

Did this answer your question?