Is TP-Link Archer C9 Modem NBN Ready?
The TP-Link Archer C9 is a popular nbn™ modem router that will also work with SpinTel for FTTN/B, FTTC, HFC, FTTP and Fixed Wireless NBN services.
To get connected via your TP-Link Archer C9 modem, you'll need to log into your modem gateway.
Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.
How Do You Log in To Your TP-Link Archer C9 Modem?
To access the modem interface, please make sure your device is connected to your modem through a wired or wireless connection.
1. From your browser, type in http://192.168.1.1 in the address bar and hit Enter.
If the IP address does not work or if it has been changed, check your router's IP address. For instructions, click here.
2. After a moment, a login window will appear. Enter admin for the User Name and Password, both in lower case letters. Then click the Login button or press the Enter key.
How Do You Set up Your TP-Link Archer C9 Modem?
After successful login, the Quick Setup page will appear for you to select your Region and Time zone. After finishing the selection, click Next.
Wan Connection Type will appear, select PPPoE for the connection type:
Enter the username and password provided to you via email when the order was completed.
Personalise your Wi-Fi credentials and click on Next. Follow the prompts (details below) until it reaches the Summary page and you're all set.
If the Setup Wizard fails,
1. Go to Basic > Internet
2. On WAN Access Type, select PPPoE for the connection type, then enter the username and password provided to you via email when the order was completed.
Click Save to apply the changes.
Wait 3-5 minutes for your TP-Link Archer C9 modem to go online, then test the service.