All Collections
Broadband Services
Modem Guides
How to Configure D-LINK AX1800 Modem
How to Configure D-LINK AX1800 Modem

This guide will assist you in connecting your D-LINK DIR-LX1870 AX1800 Whole Home Mesh Wi-Fi 6 Router to SpinTel network

Annive avatar
Written by Annive
Updated over a week ago

To get connected via your D-LINK modem, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

Logging into your modem

1. With your device connected to the modem through a wired or wireless connection,
type in http://dlinkrouterWXYZ.local./ into a web browser. (WXYZ: 4 digits suffix of MAC address)

2. Specify the admin password.

  • If this is the first logging in, leave the password blank.

  • If you have previously completed the Setup Wizard, specify the password you created during the initial setup

3. Click Log In.


4. Select Language to view the Terms of Use and Privacy Policy in other
languages. Click Agree to continue.

Operation Mode

If the DIR-LX1870 will be installed as a router, select Router Mode and click Next.

Select your language and click Next to continue.

The router will now auto-detect your Internet connection. If no Internet connection is detected, click I understand and want to continue and refer to the next page.

Once the Internet connection is detected, you will begin to configure the Wi-Fi settings. Otherwise, you will be routed to configure your internet.

  • Select Username/Password Connection and click Next to continue.

  • Enter the username and password provided to you via email when the order was completed.

  • Personalise your WiFi credentials and click on Next.

  • Follow the prompts until it reaches the Summary page and you're all set.

Wait 3-5 minutes for the modem to go online, then test the service.

Related articles:

Did this answer your question?