All Collections
Broadband Services
Modem Guides
How to Configure TP-Link Archer A6
How to Configure TP-Link Archer A6

This guide will assist you in connecting your TP-Link Archer A6 to SpinTel network

Annive avatar
Written by Annive
Updated over a week ago

To get connected via your TP-Link Archer A6 modem, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

Logging into your modem

To access modem gateway, enter or in the address bar of a web browser. If the IP address does not work or if it has been changed, check your router's IP address. For instructions, click here.

Log in with the account you set for the modem router, otherwise, enter your password if this is your first time logging in or if you have reset your modem.

1. Go to Basic > Internet

2. Select PPPoE for the internet connection type from the drop-down list.

3. Enter the username and password provided to you via email when your order was completed.

Click Save to apply the new settings.

Wait 3-5 minutes for the modem to go online, then test the service. Reboot modem if needed.

Related articles:

Did this answer your question?