All Collections
Broadband Services
Modem Guides
How to Configure Sagemcom Fast 4320
How to Configure Sagemcom Fast 4320
This guide will assist you in connecting your Sagemcom Fast 4320 modem to SpinTel network
Annive avatar
Written by Annive
Updated over a week ago

To get connected via your Sagemcom Fast 4320 modem, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

Logging into your modem

To access the modem gateway, enter 192.168.1.1 in the address bar of a web browser. If it does not work, check your router's IP address. For instructions, click here.

192.168.1.1 Default Router IP Login

Enter admin for both the username and password and click Login. If you have changed the login credentials, please enter the current username and password for your modem interface.

Once logged in, select Quick Setup

  • For Protocol, select PPPoE

  • Enter your NBN username and password provided to you via email

  • Set up your WiFi name or Wireless SSID and hit Apply/Save

Note: If other settings are presented, accept default values

Wait 3-5 minutes for the modem to go online, then test the service. Reboot modem if needed.


Related articles:

Did this answer your question?