All Collections
Broadband Services
Modem Guides
How to Configure your LINKSYS EA9500 Modem
How to Configure your LINKSYS EA9500 Modem

This guide will assist you in connecting your LINKSYS EA9500 Modem to SpinTel network

Annive avatar
Written by Annive
Updated over a week ago

To get connected via your LINKSYS modem, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

Logging into your modem

To access modem gateway enter http://192.168.1.1 in the address bar of a web browser. If it does not work or if it has been changed, check your router's IP address. For instructions, click here.

Log in with the default password admin and hit Sign In.

The web-based setup page of your modem router will then appear.

Click Connectivity to change your modem settings.

Next, select Internet Settings > choose between IPv4 or IPv6 > Edit

Change the Connection type to PPPoE and enter your NBN username and password provided to you via email.

Click Apply to save the new settings.

Wait 3-5 minutes for the modem to go online, then test the service. Reboot modem if needed.

Related articles:

Did this answer your question?