All Collections
Broadband Services
Modem Guides
How to Configure TP-Link Archer VR2600
How to Configure TP-Link Archer VR2600

This guide will assist you in connecting your TP-Link Archer VR2600 modem to SpinTel network

Annive avatar
Written by Annive
Updated over a week ago

To get connected via your TP-Link modem, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

Logging into your modem

To access modem gateway, enter http://tplinkmodem.net or http://192.168.1.1 in the address bar of a web browser. If the IP address does not work or if it has been changed, check your router's IP address. For instructions, click here.

1. Log in with the account you set for the modem router, otherwise check the default username and password on the sticker of your modem.

2. Once logged in, go to Basic > Internet page. Click on the drop-down arrow and look for SpinTel on the ISP list, otherwise, select Other if it's not listed.

Leave VLAN ID unticked.

3. Select PPPoE for the connection type. Enter the username and password provided to you via email when the order was completed.

Click Save to apply the changes.

Note: If other settings are presented, accept default values

Once done, go to Advanced > Operation Mode and check the applicable mode

  • DSL Router Mode - for FTTN/FTTB services

  • Wireless router Modem - for HFC/FW/FTTP/FTTC services

The modem will automatically reboot if you will change/update the Operation mode.

Wait 3-5 minutes for the modem to go online, then test the service. Reboot modem if needed.

Related articles:

Did this answer your question?