To get connected via your Netgear modem, you'll need to log into your modem gateway.
Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.
Logging into your modem
To access modem gateway enter http://www.routerlogin.net in the address bar of a web browser. If it does not work or if it has been changed, check your router's IP address. For instructions, click here.
Use admin for username field and password in the password field then click on Login.
The BASIC Home page displays.
Go to Internet and set up the following:
Select the Yes radio button for Does your Internet connection require a login?
From the Encapsulation menu, select PPPoE (PPP over Ethernet).
Enter the username and password provided to you via email.
Click Apply to save the new settings.
Wait 3-5 minutes for the modem to go online, then test the service. Reboot modem if needed.
If you are still unable to connect, you may try the following:
Go to ADVANCED > Setup > WAN Setup.
Update the MTU size to 1492 and click Apply to save.
Note: The normal MTU value for most Ethernet networks is 1500 bytes, whilst for PPPoE connections is 1492 bytes. Change the MTU only if it is necessary.