To get connected via your D-LINK modem, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

Logging into your modem

To access the modem gateway, enter http://192.168.1.1 in the address bar of a web browser. If the IP address does not work or if it has been changed, check your router's IP address. For instructions, click here.

Next, select admin from the drop-down menu and then enter your password. The default password is admin.

On your first login you will be directed to the Setup Wizard page, otherwise, click Wizard on the left menu and select Setup Wizard

The Setup Wizard will guide you through the following steps, click Next to proceed.

Step 1: Change Device Login Password

The default password of admin account is "admin", in order to secure your network, please modify the password. You can click Skip to ignore the step

Step 2: Set the time and date

This step of the wizard allows you to configure your Time and Date settings.

Step 3: Setup Internet connection

1. Select the appropriate WAN service type

ETH WAN - if you are connecting through FTTP, HFC, FTTC or FW service

ADSL - if you have an ADSL connection

VDSL - if you are connecting through FTTN/B service

2. Select your country and ISP. Look for SpinTel on the ISP List, otherwise, choose Other if it is not on the list. The protocol should be set to PPPoE.

3. Enter the username and password provided to you via email when the order was completed. Hit Next to continue.

Step 4 & 5: Personalise your WiFi credentials and click on Next until it reaches the Summary page. Hit Save/Apply.

Wait 3-5 minutes for the modem to go online, then test the service. Reboot modem if needed.

Related articles:

Did this answer your question?