All Collections
Broadband Services
Modem Guides
How to Configure your D-LINK DSL-2877AL Modem
How to Configure your D-LINK DSL-2877AL Modem

This guide will assist you in connecting your D-LINK DSL-2877AL modem to SpinTel network

Annive avatar
Written by Annive
Updated over a week ago

To get connected via your D-LINK modem, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

Logging into your modem

To access modem gateway, enter in the address bar of a web browser. If the IP address does not work or if it has been changed, check your router's IP address. For instructions, click here.

1. Enter admin for both the username and password and click Login. If you have changed the login credentials, please enter the current username and password for your modem interface.

2. Once logged in, click Setup Wizard

3. There are 7 steps to configure the device. Click Next to continue.

Follow the prompts:

  • Set Your Password - The default password of admin account is "admin", in order to secure your network, you may modify the password.

  • Select Your Time Zone

  • Setup Internet Connection

A. Select the internet connection type:

VDSL - for FTTN/B service

Ethernet WAN - for FTTP, HFC, FTTC or Fixed Wireless service

B. Select your country and ISP. Look for SpinTel on the ISP List, otherwise choose Other if it is not on the list. Protocol should be set to PPPoE.

C. Enter the username and password provided to you via email when the order was completed.

Personalise your WiFi credentials and click on Next until it reaches the Summary page.

Wait 3-5 minutes for the modem to go online, then test the service. Reboot modem if needed.

Related articles:

Did this answer your question?