All Collections
Broadband Services
Modem Guides
How to Configure your D-LINK DSL-2750U Modem
How to Configure your D-LINK DSL-2750U Modem

This guide will assist you in connecting your D-LINK DSL-2750U modem to SpinTel network

Annive avatar
Written by Annive
Updated over a week ago

To get connected via your D-LINK modem, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

Logging into your modem

To access the modem gateway, enter in the address bar of a web browser. If the IP address does not work or if it has been changed, check your router's IP address. For instructions, click here.

1. Enter admin for both the username and password and validate the given code to Login. If you have changed the login credentials, please enter the current username and password for your modem interface.

2. Once logged in, click Setup Wizard

3. There are five steps to configure the device. Click Next to continue.

  • Change Device Login Password.
    The default password of admin account is "admin", in order to secure your network, please modify the password. You can click Skip to ignore the step

  • Set the time and date.

  • Configure the Internet connection.
    Select your country and ISP. Look for SpinTel on the ISP List, otherwise choose Other if it is not on the list. Protocol should be set to PPPoE.

Enter the username and password provided to you via email when the order was completed. Personalise your WiFi credentials and click on Next until it reaches the Summary page.

Wait 3-5 minutes for the modem to go online, then test the service. Reboot modem if needed.

Related articles:

Did this answer your question?