All Collections
Broadband Services
Modem Guides
How to Configure TP-Link TD-W9977
How to Configure TP-Link TD-W9977

This guide will assist you in connecting your TP-Link TD-W9977 modem to SpinTel network

Annive avatar
Written by Annive
Updated over a week ago

To get connected via your TP-Link TD-W9977 modem, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

Logging into your modem

To access modem gateway, enter in the address bar of a web browser. If the IP address does not work or if it has been changed, check your router's IP address. For instructions, click here.

1. Log in with the account you set for the modem router, otherwise check the default username and password on the sticker of your modem.

2. Once logged in, follow Quick Setup guide

  • Look for SpinTel on the ISP List, otherwise select Other if not listed and hit Next.

  • Select VDSL for the interface type, VLAN ID unticked and PPPoE for the Connection type.

  • Enter the username and password provided to you via email when the order was completed. Hit Next to continue.

  • Personalise your WiFi credentials and click on Next until it reaches the Summary page

Alternatively, you can set it up on Basic tab > Internet then supply the information needed (same information above). Click Save to apply the changes.

Once done, go to Advanced tab and make sure Operation Mode is set to Wireless Router Mode. Test the service.

Related articles:

Did this answer your question?