To get connected via your TP-Link modem, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

To access modem gateway, enter http://tplinkmodem.net or http://192.168.1.1 in the address bar of a web browser. If the IP address does not work or if it has been changed, check your router's IP address. For instructions, click here.

Use admin for username field and password in the password field. Otherwise, log in with the account you set for the modem router then click on Login.

For Newer Version

1. Once logged in, you will be routed to the quick setup.
First, go to Advanced tab and make sure Operation Mode is set to Router Mode as shown below:

The modem will automatically reboot if you will change/update the Operation mode.

2. Once done, you can configure the modem through Quick setup or on the Advanced tab.

On the Quick setup tab, follow the prompts and select PPPoE for the connection type

Enter the username and password provided to you via email.

Personalise your WiFi credentials and click on Save. A confirmation page will show if setup is successful.

Alternatively, you can set it up on Advanced tab > Network > Internet

Change the connection type to PPPoE, then enter your username and password. Click Save to apply the changes and click Connect.

For some other hardware version, please refer to the image below:

Note: Leave VLAN ID unticked. Don't forget to check the Operation mode on Advanced tab and make sure it's on a Router/Wireless Router mode.

Wait 3-5 minutes for the modem to go online, then test the service.

For Older Version

1. Once logged in to the modem interface, you will be routed to the Quick Setup page. You can either follow the prompts to continue with the setup, or do it on the Network tab.

Choose PPPoE for the connection type, then enter the username and password provided to you via email. Click Save to apply the new settings and click on Connect.

On the quick setup page, you will be asked to modify your WiFi credentials. Click on Next until a confirmation page will show that setup is successful.

Wait 3-5 minutes for the modem to go online, then test the service.


Did this answer your question?