To get connected via your Tenda modem, you'll need to log into your modem gateway. Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.


Logging into your modem

1. Launch a web browser and enter 192.168.0.1 in the Address bar, then press [Enter]. If the IP address does not work or if it has been changed, check your router's IP address. For instructions, click here.

The router will automatically detect WAN connection status when you press the Enter key (This happens when you first time set up the router or when you restore the router to factory default settings). Enter your credentials and save them to apply.

Otherwise, go to Internet Settings and select PPPoE for the connection type.

2. Enter the username and password provided in your email when your order was completed.

3. Click OK to apply the new settings.

Wait 3-5 minutes for the modem to go online, then test the service.

Did this answer your question?