All Collections
Broadband Services
Modem Guides
How to configure your Tenda AC1200 model 4G09
How to configure your Tenda AC1200 model 4G09

This guide will assist you in connecting your Tenda modem to SpinTel network

Annive avatar
Written by Annive
Updated over a week ago

To get connected via your Tenda modem, you'll need to log into your modem gateway. Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.


Logging into your modem

1. Launch a web browser and type in tendawifi.com in the Address bar, then press [Enter]. If it doesn't work, check your router's IP address. For instructions, click here.

2. Enter your login password, and click Login.

The router will automatically detect WAN connection status when you press the Enter key (This happens when you first time set up the router or when you restore the router to factory default settings). Enter your nbn credentials and save them to apply.

Otherwise, go to Internet Settings and select PPPoE for the connection type.

Enter the username and password provided to you via email and hit Connect to apply.

Wait 3-5 minutes for the modem to go online, then test the service.

Did this answer your question?