All Collections
Broadband Services
Modem Guides
How to Configure TP-Link Archer C7 V4
How to Configure TP-Link Archer C7 V4

This guide will assist you in connecting your TP-Link Archer C7 V4 to SpinTel network

Annive avatar
Written by Annive
Updated over a week ago

To get connected via your TP-Link Archer C7 V4 modem, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

Logging into your modem

To access modem gateway enter in the address bar of a web browser. If the IP address does not work or if it has been changed, check your router's IP address. For instructions, click here.

Use admin for both username and password field and click on Login.

Follow Quick Setup

  1. Select your Time Zone and click Next.

  2. Select PPPOE for the Internet Connection type and click Next.

3. Enter the username and password provided to you via email.

Personalise your WiFi credentials and click on Save. A confirmation page will show if setup is successful.

Once done, go to Advanced tab and make sure Operation Mode is set to Router Mode as shown below:

Wait 3-5 minutes for the modem to go online, then test the service. Reboot the modem if necessary.

Related articles:

Did this answer your question?