How to Configure Your TPLink Archer C4000 Modem

Is TP-Link Archer C4000 Modem NBN Ready?

The TP-Link Archer C4000 is a popular nbn™ modem router that will also work with SpinTel for FTTN/B, FTTC, HFC, FTTP and Fixed Wireless NBN services.

To get connected via your TP-Link Archer C4000 modem, you’ll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

How Do You Log in To Your TP-Link Archer C4000 Modem?

To access the modem interface, please make sure your device is connected to your modem through a wired or wireless connection.

1. From your browser, type in http://192.168.1.1 in the address bar and hit Enter.

If the IP address does not work or if it has been changed, check your router’s IP address. For instructions, click here.

2. After a moment, a login window will appear, create a login password for secure management purposes. Then click Let’s Get Started to log in.

How Do You Set up Your TP-Link Archer C4000 Modem?

Once logged in, the Quick Setup shows up, click Next to continue

Select your Time Zone from the drop-down list and click Next

Internet Connection Type will appear, select PPPoE for the connection type:

Enter the username and password provided to you via email when the order was completed.

Personalise your Wi-Fi credentials and click on Next. Follow the prompts (details below) until it reaches the Summary page and you’re all set.

Click the Finish button to complete the Quick Setup.

If the Setup Wizard fails,

1. Go to Basic > Internet on the left to enter the setting page.

Select your Internet connection type from the drop-down list, then enter the username and password provided to you via email when the order was completed.

• Click Save to apply the changes

Wait 3-5 minutes for your TP-Link Archer C4000 modem to go online, then test the service.