All Collections
Broadband Services
Modem Guides
How to Configure your Netgear Nighthawk AX12
How to Configure your Netgear Nighthawk AX12

This guide will assist you in connecting your Netgear Nighthawk AX12 12-Stream AX6000 WiFi Router Model RAX120 to SpinTel network

Annive avatar
Written by Annive
Updated over a week ago

To get connected via your Netgear modem, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

Logging into your modem

To access modem gateway enter http://www.routerlogin.net in the address bar of a web browser. If it does not work or if it has been changed, check your router's IP address. For instructions, click here.

Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in.

Once logged in, the BASIC Home page displays.

  1. Click on Internet

2. In the WAN Preference section, select Internet Port (1 Gbps)

3. In Does your Internet connection require a login? section, select the Yes radio
button

4. From the Internet Service Provider menu, select PPPoE for the encapsulation method

5. Enter the username (login name) and password provided to you via email

Click the Apply button to save the new settings

Wait 3-5 minutes for the modem to go online, then test the service.

Related articles:

Did this answer your question?