All Collections
Broadband Services
Modem Guides
How to Configure your Netgear R8000 Modem
How to Configure your Netgear R8000 Modem

This guide will assist you in connecting your Netgear R8000 Modem to SpinTel network

Annive avatar
Written by Annive
Updated over a week ago

To get connected via your Netgear modem, you'll need to log into your modem gateway.

Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

Logging into your modem

To access modem gateway enter http://www.routerlogin.com in the address bar of a web browser. If it does not work or if it has been changed, check your router's IP address. For instructions, click here.

Use admin for username field and password in the password field then click on Login.

The BASIC Home page displays.

Select Internet then set up the following:

  • For the Does your Internet connection require a login? setting, select the Yes radio button.

  • In the Internet Service Provider list, select the encapsulation method: PPPoE

  • Enter the username and password provided to you via email.

  • Click the Apply button to Save.

Note: If other settings are presented, accept default values

Wait 3-5 minutes for the modem to go online, then test the service. Reboot modem if needed.

If you are still unable to connect, you may try the following:

  • Go to ADVANCED > Setup > WAN Setup.

  • Update the MTU size to 1492 and click Apply to save.

Note: The normal MTU value for most Ethernet networks is 1500 bytes, whilst for PPPoE connections is 1492 bytes. Change the MTU only if it is necessary.

Related articles:

Did this answer your question?