Configuring DrayTek Modem for SpinTel NBN

How do you know if your DrayTek modem is compatible with nbn?

There are 2 different types of ports you need to check whether your modem is compatible with the type of nbn service that you have on your premise.

1. DSL port - often grey in colour, uses RJ11 cable. This is the same as the old telephone cable you would use to plug your home phone into the wall socket.

DSL Port location

2. WAN port - Also known as the internet port that uses RJ-45 Ethernet cable to connect your DrayTek modem to the nbn connection device.

WAN Port location

Some modems have both of these ports, and some only have one. To identify which port is required for your nbn type of service, check the table below.

 

NBN type

Modem connection type

Authentication

Port Required

Fibre to the Premise

Router/WAN connection

IPOE/Dynamic/DHCP/Automatic IP

WAN

Fixed Wireless

Router/WAN connection

IPOE/Dynamic/DHCP/Automatic IP

WAN

Hybrid Fibre Coaxial

Router/WAN connection

IPOE/Dynamic/DHCP/Automatic IP

WAN

Fibre to the Curb

Router/WAN connection

IPOE/Dynamic/DHCP/Automatic IP

WAN

Fibre to the Node

VDSL Modem required

IPOE/Dynamic/DHCP/Automatic IP

DSL

Fibre to the Basement

VDSL Modem required

IPOE/Dynamic/DHCP/Automatic IP

DSL

 

How Do You Set up Your DrayTek Modem?

  1. If there is no NBN Connection Box installed, connect the DSL port on the back of your DrayTek modem to your phone wall socket using a phone cable.
  2. If there is an NBN Connection Box installed, connect to the WAN/Internet port on the back of your modem to your NBN Connection Box.
  3. Connect any of the LAN ports on the back of your modem to your PC (optional)
  4. Plug the NBN connection box, if there’s any, to the power socket.
  5. Connect the power port on the back of your modem to your power socket.

 

How Do You Log Into Your DrayTek Modem?

To access the modem interface, please make sure your device is connected to your DrayTek modem through a wired or wireless connection.

  1. From your browser, type in http://192.168.1.1 in the address bar and hit Enter.

If the IP address does not work, please check the label attached to the back of the modem/router. Else, check your router’s IP address. For instructions, click here.

  1. Log in with the account you set for the modem router, otherwise check the default username and password on the sticker of your modem.

 

How Do You Configure Your DrayTek Modem?

Once logged in, click the Quick Start Wizard.

1. The first screen of Quick Start Wizard is entering login password of the web user interface. After typing the password, please click Next.

password setup window

 

2. Create New WAN Interface, then click Next.

wan interface setup

3. Select IPoE on Protocol Encapsulation

4. Select No(Dynamic IP) on Fixed IP the hit Next

Wan settings window

 

5. Review Summary then hit Finish to complete.

finalize settings window

 

Wait 3-5 minutes for the modem to go online, then test the service. Reboot modem if needed.


Article ID: 831
Created: May 20, 2024
Last Updated: July 1, 2024
Author: Annive Federicos [annive.federicos@spintel.net.au]

Online URL: https://articles.spintel.net.au/article/configuring-draytek-modem-for-spintel-nbn.html