All Collections
Broadband Services
4G Wireless Broadband Troubleshooting
Unable to Connect after Configuring Wireless Broadband service with Netcomm NL1901
Unable to Connect after Configuring Wireless Broadband service with Netcomm NL1901

Things to check when modem configuration failed to connect your NL1901 to the Network

Annive avatar
Written by Annive
Updated over a week ago

Given that you have configured the modem manually, and you are still unable to connect, click on Device Info then Summary. Scroll down at the very bottom till Device Info for Cellular Network is seen.

Link Not Connected, SIM info: SIM not inserted
  • If the SIM card is not detected, unplug your modem from the power source and check if the SIM card is inserted correctly as shown below.

Gold contacts facing up
  • Check the signal strength and consider placing your modem where it can get better reception.

Once done, access the modem gateway and check if the settings has been retained when you configure it the first time.

Understanding Action Type of a WBB Settings

  1. Connect- this means the current setting is not used or not connected yet to the network. If this is the case you just need to hit Connect provided that the setting of it is correct.

Action says "Connect", click it to apply the settings

2. Disconnect - this means the current setting is being used by the modem.

Settings are applied when action says "Disconnect"


โ€‹

Did this answer your question?